Calyx RIM 6.2 Release Notes

Resolved Issues: Calyx RIM 6.2 CHF 4

The following issues that were reported to Technical Support have been resolved. Issues are listed in descending order by their internal tracking numbers. Customer incident numbers that were recorded when the issues were reported are included in brackets following the internal tracking number.

Calyx RIM 6.2 CHF 4 resolves the following issues.


Issue	Build	Hotfix Build	Description
26452; [INC0015705] 26383; [INC0015705]	6.2.0.4.0079	N/A	The Concerned Parties values were getting deleted when the Create eCTD Wizard was used from the Sequence page of an application containing multiple sequences as well as from an application with a single sequence. This issue is resolved. The information of the Sequence Concerned Parties is displayed properly.
26447	6.2.0.4.0079	N/A	On the Product Family Attributes page, the following attributes were incorrectly listed after the Development Sponsor attribute. This issue was specific to the Pharmaceutical, Veterinary and Flu Vaccine product family types. This issue is resolved. Now, these attributes are listed after the Approved Trade Names attribute. Product Family Concerned Parties Product Family Keywords Product Family Description Product Family Comments
26438; [INC0020386]	6.2.0.4.0079	N/A	The `<sequence>` value in published .xml output was not the same as the value defined for Sequence on the regional or envelope Folder Attributes page. This issue is resolved. The value defined under Folder Attributes is displayed in the `<sequence>` tag for the versions of EU 3.0.1/3.0.3, JO-1.0 and GCC-1.5.
26422; [INC0019310]	6.2.0.4.0079	N/A	Links with "Application" applicability were mixing (appeared where not necessary and disappeared where necessary) after DMS synchronization if the new minor version of the same document had been created in Documentum. This issue is resolved.
26419; [INC0019054]	6.2.0.4.0079	N/A	When a Package Set was associated with a Registration instead of with a Full Product Presentation (FPP), the information from the PDS Active Ingredients of the Package Set was included in the submission XML. This issue is resolved.
26417; [INC0018864]	6.2.0.4.0079	N/A	An Application was not updated with the Withdrawn status despite the Registration License Status value being internally mapped to Withdrawn. This issue is resolved.
26409; [INC0018167]	6.2.0.4.0079	N/A	The search functionality did not work in the Approved Views of an assembly. This issue is resolved.
26404; [INC0018012]	6.2.0.4.0079	N/A	When a link was created to a bookmark in a document from a previous sequence, the link created targeted to the first page of the document, instead of the bookmark. This issue is resolved. Now the links target to the correct page.
26398; [INC0017367]	6.2.0.4.0079	N/A	When using the Copy Registration Wizard, trying to copy a registration in a multiple country application such as an MRP or DCP resulted in an error. The error was due to the constraint on the Medicinal Regulatory Agency field. This issue is resolved. After using the Copy Registration Wizard, the field Medicinal Regulatory Agency becomes blank and the value must be updated manually.
26395; [INC0016670]	6.2.0.4.0079	6.2.0.3.0084	Folders in the approved view were out of order. This issue is resolved.
26388; [INC0016307]	6.2.0.4.0079	N/A	In the Create Submission wizard Sequence Code field, despite entering a code of four digits as recommended, the following error was displayed: `If this is an eCTD submission it is recommended you enter a four digit sequence code`. This issue is resolved. There are no warning messages if the four digits are entered.
26386; [INC0016091]	6.2.0.4.0079	N/A	A first request to create the `parexel__c` rendition for a PDF document from Veeva failed. This issue is resolved. The source document is retrieved instead of the `parexel__c` rendition if Standard Rendition is selected for a Veeva PDF file. For another Rendition Identifier value and non-PDF documents, the corresponding rendition is used. Now, in some cases two calls instead of three are sent to Veeva.
26371; [INC0015303]	6.2.0.4.0079	N/A	Gaps in the out-of-the-box (OOTB) Calyx RIM Reporting Schema for Analytics were identified during custom report development. This issue is resolved.
26367	6.2.0.4.0079	6.2.0.2.0091	Calyx RIM retrieved only the first 999 groups when authenticating a user in Azure. As a result, users not in one of the first 999 groups were unable to log on. This issue is resolved.
26361; [INC0014994]	6.2.0.4.0079	6.2.0.3.0073	Leaf attributes were missing from a leaf in the Approved View when that leaf was replaced in a previously lifecycled sequence. This issue is resolved.
26344; [INC0014379]	6.2.0.4.0079	N/A	On the Add or Edit Page Marker menu, changing the Page Number to more than 3 characters caused the error message: `Page Number cannot exceed 3 characters`. This issue is resolved. Now, it is possible to enter 5 characters in the Page Number field.
26339; [INC0014292]	6.2.0.4.0079	N/A	Calyx RIM failed to update the following via the API: Historical or future dates in the Event Country Status Schedule. Projected and actual dates in the Sequence Status Schedule. The issues are resolved.
26336; [INC0014237]	6.2.0.4.0079	N/A	The XEVMPD Submission Wizard worked incorrectly for the Invalidate MA operation type on an Authorised Product when there was more than one Event for PDS prompting the error message: `No Active Ingredient was specified`. This issue is resolved.
26328; [INC0014090]	6.2.0.4.0079	6.2.0.3.0070	When the lifecycle operation on the same leaf across different sequences was performed and those events were added to the Approved View, using the Change Status Wizard resulted in an error. This issue is resolved.
26323; [INC0013607]	6.2.0.4.0079	N/A	Manually adding an event to the Approved view resulted in the error: `The object you are acting on has been deleted or modified by another user. Refresh your object to view the current information` if the assembly had been created from another assembly and this source assembly was removed from the system. In the Update Status Wizard, trying to add an event to the Approved view resulted in Calyx RIM freezing and the same error registering in the log file. These issues are resolved.
26320; [CS0042776 ]	6.2.0.4.0079	6.2.0.2.0087, 6.2.0.3.0071	Calyx RIM users authenticating with Azure AD were unable to access Veeva using Single Sign-On when Veeva was configured to authenticate using ADFS. This issue is resolved.
26316; [INC0012933]	6.2.0.4.0079	N/A	Starting from Calyx RIM 6.1 CHF 4, the migration to Calyx RIM 6.2 and CHFs failed with an ORA error in logs for some customers. This issue is resolved by removing the `select * from dv_user_workflow_secure` query from the migration package.
26307; [CS0027071]	6.2.0.4.0079	6.2.0.2.0091, 6.2.0.3.0074	When Calyx RIM was configured to use Single Sign-On via Microsoft Azure, a user disassociated from an Azure group added to Calyx RIM was unable to be re-associated back to that group. This issue is resolved.
26306; [INC0012619, INC0013266 ]	6.2.0.4.0079	N/A	Calyx RIM failed to populate the user name of the last logged on user on the Login page. This issue is resolved.
26300; [00063883]	6.2.0.4.0079	N/A	After an EU MRP assembly with an updated folder structure different from the template order was lifecycled, the Sequence view displayed empty folders in the next Working assembly after Create eCTD was launched. This issue is resolved. Now, the Sequence view does not include any empty folders.
26291, 26410; [INC0012181, INC0018227]	6.2.0.4.0079	N/A	In a Working assembly, the Replace action on a reference leaf resulted in infinite loading of the assembly tree. This issue is resolved.
26287; [00012133]	6.2.0.4.0079	N/A	The New menu on the Calyx RIM home page displayed the following options only when access was enabled to more than one of the options in Security Administration. When access was enabled to only one of the following options, that option failed to appear under the New menu: System Alert Publishing Settings Library Template Change Registration Attachment These issues are resolved.
26286; [INC0012051]	6.2.0.4.0079	N/A	Retrieving a list of assembly templates via Calyx RIM API requests failed. This issue is resolved.
26283	6.2.0.4.0079	N/A	When retrieving a full list of PingOne users using the Add User/Group Wizard, the search result displayed only 10 users. This issues is resolved.
26278	6.2.0.4.0079	N/A	When e-signature was enabled for Azure AD and Okta users, the system accepted any user credentials for e-signature instead of the logged in user credentials. As a result, anyone (including Read-only users) could sign in and save changes. This issue is resolved.
26255; [00065020]	6.2.0.4.0079	6.1.0.6.0016	Creating a standalone assembly using the JO 1.0 assembly template and then executing the Create Study Report Wizard failed with a `cannot determine region based on dtds` error. This issue is resolved.
26247, 26405; [00064107, 00016162, INC0018046]	6.2.0.4.0079	N/A	When a document from a Veeva repository was assigned, the rendition information was recognized incorrectly by Calyx RIM. This resulted in an unnecessary extract request: if a TOC had Calyx RIM bookmarks that were edited, the edit changes did not appear in the generated TOC. Also, an extraction request was sent with each rendition, even when the rendition parameters were not changed. These issues are resolved. When documents are assigned from a Veeva repository, the rendition information is recognized correctly and edits appear correctly in the generated TOC. If rendition parameters are not changed, no extraction request is sent.
26245; [00065009]	6.2.0.4.0079	6.2.0.3.0068	Calyx RIM authentication via API failed when an application server was configured with multiple domains. This issue is resolved.
26240; [00064944]	6.2.0.4.0079	6.2.0.3.0070	When replacing a leaf in a subsequent sequence associated with a new event, closing the event and creating an approved view, both the new leaf and the replaced leaf were displayed in the approved view. This issue is resolved. Only replaced leaf is displayed in approved view.
26236; [00064804]	6.2.0.4.0079	N/A	When the Procedure Identifier field was populated during migration by the system user, the User and Updated Date column values that were recorded in the XEVMPD Audit Report were incorrect. This issue is resolved.
26227; [00064595]	6.2.0.4.0079	N/A	If the time of the Approved status was set to a time that was earlier than that of the Submitted status, the status in the Event attributes in the Countries tab changed to Submitted. This issue is resolved.
26210, 25081; [00064119, 00064088, 00063968, 00050671]	6.2.0.4.0079	6.2.0.2.0081, 6.2.0.3.0065	Support for Veeva users configured for SSO authentication has been added to Calyx RIM.
26201;	6.2.0.4.0079	N/A	When e-signature is enabled for PingOne users, the system accepted any user credentials for e-signature instead of the logged in user credentials. As a result, anyone (including Read-only users) could sign in and save changes. This issue is resolved.
26199; [00064147]	6.2.0.4.0079	N/A	Extractions were generated for each assembly element containing a special sheet, if it pointed to the same template, and there was more than one settings profile with the same template file. It happened after the template update and the next Render Generated TOCs and Special Sheet Templates. This issue is resolved. Now extraction request is sent once per special sheet template.
26195; [00064087]	6.2.0.4.0079	N/A	When an activity name was longer than 255 characters, trying to complete that activity resulted in an error. This issue is resolved.
26193; [00064402]	6.2.0.4.0079	N/A	When selecting a file with an uppercase extension ( For example - .DOC or .PDF) in the Registration Attachment page, the Attachment Name and the File Name fields were not populated. This issue is resolved.
26163; [00063867]	6.2.0.4.0079	N/A	Folder structure of study reports created when importing an eCTD application was incorrect. This issue is resolved.
26142; [00063604]	6.2.0.4.0079	N/A	When using the Volumize feature on an assembly that contained a volume with a TOC attached to it, there was an error. This issue is resolved.
26139; [00063733]	6.2.0.4.0079	N/A	Creating a new assembly, or importing using an existing assembly, took longer than expected. This issue is resolved.
26137; [00062685]	6.2.0.4.0079	N/A	An invalid reference error occurred when changing the XML definition file in the publishing settings from U.S. 2.0.1 to U.S 3.3 if more than one application type with the same us-3-3 Application DTD/Schema and eCTD code existed. This issue is resolved.
26127; [00063568]	6.2.0.4.0079	N/A	The URL in the e-mail that was sent to concerned users when an Event-Country Status was changed, failed to resolve to the expected target. This issue is resolved. Now, clicking the URL navigates to the event country where the status was created or updated.
26122; [00063208 ]	6.2.0.4.0079	6.2.0.3.0070	A role was not accessible on the Security Administration page if the role had all License Modules settings set to None/Select. This issue is resolved.
26120; [00063566]	6.2.0.4.0079	N/A	When an assembly section was selected in the Import Assembly Wizard or when creating an assembly from assembly, the corresponding assembly tree sections at the bottom half of the page were not displayed. Also, the full length of the scroll bar was not displayed, even on a maximized browser window. These issue are resolved.
26063; [00062715]	6.2.0.4.0079	N/A	The query for the List of Product Registrations with Application and Product Detail Properties report failed to display the result on the screen. This issue is resolved.
26057; [00063029]	6.2.0.4.0079	N/A	The Reset TOC Content button was not enabled in assemblies unless the Standalone Assemblies value for Home Page access under Security Administration was set to `Yes`. This issue is resolved.
26046; [00062700]	6.2.0.4.0079	N/A	The performance of refreshing the Link Inspector took several hours. This issue is resolved. The performance has been improved in sequence assemblies with: External links in documents when source and target are within the same tree Internal links in documents In-Process links in documents
25996; [00060206]	6.2.0.4.0079	N/A	In the Global Project Planning (GPP) wizard, selecting multiple events that exceeded the query limit, resulted in the disappearance of the Update Project Event Country Status field in some cases. The SQL query limit has been increased. This issue is resolved.
25990; [00060779]	6.2.0.4.0079	N/A	When trying to create an Event-Country Status under a closed Event that was created via a workflow, there was an error. This issue is resolved.
25941; [00060258]	6.2.0.4.0079	N/A	Unauthorized remote users were able to access Red Hat JBoss EJBInvokerServlet. This issue is resolved by commenting the JBoss `EJBInvokerServlet` code block in the web.xml file. For more information, see Disabling Unauthorized Users from Accessing Red Hat JBoss EJBInvokerServlet.
25979; [00060743]	6.2.0.4.0079	N/A	When the screen resolution was set lower than [X]x1050 format, users were not able to send a publish request because the OK and Cancel buttons on the Publish Request and Job Details windows were not visible. This issue is resolved.
25862	6.2.0.4.0079	N/A	In an assembly tree, after running Prepare to Publish, deleting a leaf containing a source document linked to a target document resulted in a warning: "ORA-02292: integrity constraint (ODS.R_339) violated - child record found." This issue is resolved.
25566; [00054314]	6.2.0.4.0079	N/A	When using the eCTD Import process to import an assembly containing reference leafs and assigned documents down in the assembly tree, the reference leafs and the documents were switched in the imported assembly. This issue is resolved.
24253; [00042959]	6.2.0.4.0079	N/A	Performance was decreased when updating an assembly structure and when using the Prepare to Publish functionality to remove empty leafs and folders. The decrease in performance sometimes resulted in failures because of concurrent activities in progress. These issues are now minimized improved performance from Assembly enhancements. See: Liquent InSight 6.2 CHF 4 Release Notes

JavaScript must be enabled in order to use this site.Please enable JavaScript in your browser and refresh the page.

Resolved Issues: Calyx RIM 6.2 CHF 4

The following issues that were reported to Technical Support have been resolved. Issues are listed in descending order by their internal tracking numbers. Customer incident numbers that were recorded when the issues were reported are included in brackets following the internal tracking number.

Calyx RIM 6.2 CHF 4 resolves the following issues.


Issue	Build	Hotfix Build	Description
26452; [INC0015705] 26383; [INC0015705]	6.2.0.4.0079	N/A	The Concerned Parties values were getting deleted when the Create eCTD Wizard was used from the Sequence page of an application containing multiple sequences as well as from an application with a single sequence. This issue is resolved. The information of the Sequence Concerned Parties is displayed properly.
26447	6.2.0.4.0079	N/A	On the Product Family Attributes page, the following attributes were incorrectly listed after the Development Sponsor attribute. This issue was specific to the Pharmaceutical, Veterinary and Flu Vaccine product family types. This issue is resolved. Now, these attributes are listed after the Approved Trade Names attribute. Product Family Concerned Parties Product Family Keywords Product Family Description Product Family Comments
26438; [INC0020386]	6.2.0.4.0079	N/A	The `<sequence>` value in published .xml output was not the same as the value defined for Sequence on the regional or envelope Folder Attributes page. This issue is resolved. The value defined under Folder Attributes is displayed in the `<sequence>` tag for the versions of EU 3.0.1/3.0.3, JO-1.0 and GCC-1.5.
26422; [INC0019310]	6.2.0.4.0079	N/A	Links with "Application" applicability were mixing (appeared where not necessary and disappeared where necessary) after DMS synchronization if the new minor version of the same document had been created in Documentum. This issue is resolved.
26419; [INC0019054]	6.2.0.4.0079	N/A	When a Package Set was associated with a Registration instead of with a Full Product Presentation (FPP), the information from the PDS Active Ingredients of the Package Set was included in the submission XML. This issue is resolved.
26417; [INC0018864]	6.2.0.4.0079	N/A	An Application was not updated with the Withdrawn status despite the Registration License Status value being internally mapped to Withdrawn. This issue is resolved.
26409; [INC0018167]	6.2.0.4.0079	N/A	The search functionality did not work in the Approved Views of an assembly. This issue is resolved.
26404; [INC0018012]	6.2.0.4.0079	N/A	When a link was created to a bookmark in a document from a previous sequence, the link created targeted to the first page of the document, instead of the bookmark. This issue is resolved. Now the links target to the correct page.
26398; [INC0017367]	6.2.0.4.0079	N/A	When using the Copy Registration Wizard, trying to copy a registration in a multiple country application such as an MRP or DCP resulted in an error. The error was due to the constraint on the Medicinal Regulatory Agency field. This issue is resolved. After using the Copy Registration Wizard, the field Medicinal Regulatory Agency becomes blank and the value must be updated manually.
26395; [INC0016670]	6.2.0.4.0079	6.2.0.3.0084	Folders in the approved view were out of order. This issue is resolved.
26388; [INC0016307]	6.2.0.4.0079	N/A	In the Create Submission wizard Sequence Code field, despite entering a code of four digits as recommended, the following error was displayed: `If this is an eCTD submission it is recommended you enter a four digit sequence code`. This issue is resolved. There are no warning messages if the four digits are entered.
26386; [INC0016091]	6.2.0.4.0079	N/A	A first request to create the `parexel__c` rendition for a PDF document from Veeva failed. This issue is resolved. The source document is retrieved instead of the `parexel__c` rendition if Standard Rendition is selected for a Veeva PDF file. For another Rendition Identifier value and non-PDF documents, the corresponding rendition is used. Now, in some cases two calls instead of three are sent to Veeva.
26371; [INC0015303]	6.2.0.4.0079	N/A	Gaps in the out-of-the-box (OOTB) Calyx RIM Reporting Schema for Analytics were identified during custom report development. This issue is resolved.
26367	6.2.0.4.0079	6.2.0.2.0091	Calyx RIM retrieved only the first 999 groups when authenticating a user in Azure. As a result, users not in one of the first 999 groups were unable to log on. This issue is resolved.
26361; [INC0014994]	6.2.0.4.0079	6.2.0.3.0073	Leaf attributes were missing from a leaf in the Approved View when that leaf was replaced in a previously lifecycled sequence. This issue is resolved.
26344; [INC0014379]	6.2.0.4.0079	N/A	On the Add or Edit Page Marker menu, changing the Page Number to more than 3 characters caused the error message: `Page Number cannot exceed 3 characters`. This issue is resolved. Now, it is possible to enter 5 characters in the Page Number field.
26339; [INC0014292]	6.2.0.4.0079	N/A	Calyx RIM failed to update the following via the API: Historical or future dates in the Event Country Status Schedule. Projected and actual dates in the Sequence Status Schedule. The issues are resolved.
26336; [INC0014237]	6.2.0.4.0079	N/A	The XEVMPD Submission Wizard worked incorrectly for the Invalidate MA operation type on an Authorised Product when there was more than one Event for PDS prompting the error message: `No Active Ingredient was specified`. This issue is resolved.
26328; [INC0014090]	6.2.0.4.0079	6.2.0.3.0070	When the lifecycle operation on the same leaf across different sequences was performed and those events were added to the Approved View, using the Change Status Wizard resulted in an error. This issue is resolved.
26323; [INC0013607]	6.2.0.4.0079	N/A	Manually adding an event to the Approved view resulted in the error: `The object you are acting on has been deleted or modified by another user. Refresh your object to view the current information` if the assembly had been created from another assembly and this source assembly was removed from the system. In the Update Status Wizard, trying to add an event to the Approved view resulted in Calyx RIM freezing and the same error registering in the log file. These issues are resolved.
26320; [CS0042776 ]	6.2.0.4.0079	6.2.0.2.0087, 6.2.0.3.0071	Calyx RIM users authenticating with Azure AD were unable to access Veeva using Single Sign-On when Veeva was configured to authenticate using ADFS. This issue is resolved.
26316; [INC0012933]	6.2.0.4.0079	N/A	Starting from Calyx RIM 6.1 CHF 4, the migration to Calyx RIM 6.2 and CHFs failed with an ORA error in logs for some customers. This issue is resolved by removing the `select * from dv_user_workflow_secure` query from the migration package.
26307; [CS0027071]	6.2.0.4.0079	6.2.0.2.0091, 6.2.0.3.0074	When Calyx RIM was configured to use Single Sign-On via Microsoft Azure, a user disassociated from an Azure group added to Calyx RIM was unable to be re-associated back to that group. This issue is resolved.
26306; [INC0012619, INC0013266 ]	6.2.0.4.0079	N/A	Calyx RIM failed to populate the user name of the last logged on user on the Login page. This issue is resolved.
26300; [00063883]	6.2.0.4.0079	N/A	After an EU MRP assembly with an updated folder structure different from the template order was lifecycled, the Sequence view displayed empty folders in the next Working assembly after Create eCTD was launched. This issue is resolved. Now, the Sequence view does not include any empty folders.
26291, 26410; [INC0012181, INC0018227]	6.2.0.4.0079	N/A	In a Working assembly, the Replace action on a reference leaf resulted in infinite loading of the assembly tree. This issue is resolved.
26287; [00012133]	6.2.0.4.0079	N/A	The New menu on the Calyx RIM home page displayed the following options only when access was enabled to more than one of the options in Security Administration. When access was enabled to only one of the following options, that option failed to appear under the New menu: System Alert Publishing Settings Library Template Change Registration Attachment These issues are resolved.
26286; [INC0012051]	6.2.0.4.0079	N/A	Retrieving a list of assembly templates via Calyx RIM API requests failed. This issue is resolved.
26283	6.2.0.4.0079	N/A	When retrieving a full list of PingOne users using the Add User/Group Wizard, the search result displayed only 10 users. This issues is resolved.
26278	6.2.0.4.0079	N/A	When e-signature was enabled for Azure AD and Okta users, the system accepted any user credentials for e-signature instead of the logged in user credentials. As a result, anyone (including Read-only users) could sign in and save changes. This issue is resolved.
26255; [00065020]	6.2.0.4.0079	6.1.0.6.0016	Creating a standalone assembly using the JO 1.0 assembly template and then executing the Create Study Report Wizard failed with a `cannot determine region based on dtds` error. This issue is resolved.
26247, 26405; [00064107, 00016162, INC0018046]	6.2.0.4.0079	N/A	When a document from a Veeva repository was assigned, the rendition information was recognized incorrectly by Calyx RIM. This resulted in an unnecessary extract request: if a TOC had Calyx RIM bookmarks that were edited, the edit changes did not appear in the generated TOC. Also, an extraction request was sent with each rendition, even when the rendition parameters were not changed. These issues are resolved. When documents are assigned from a Veeva repository, the rendition information is recognized correctly and edits appear correctly in the generated TOC. If rendition parameters are not changed, no extraction request is sent.
26245; [00065009]	6.2.0.4.0079	6.2.0.3.0068	Calyx RIM authentication via API failed when an application server was configured with multiple domains. This issue is resolved.
26240; [00064944]	6.2.0.4.0079	6.2.0.3.0070	When replacing a leaf in a subsequent sequence associated with a new event, closing the event and creating an approved view, both the new leaf and the replaced leaf were displayed in the approved view. This issue is resolved. Only replaced leaf is displayed in approved view.
26236; [00064804]	6.2.0.4.0079	N/A	When the Procedure Identifier field was populated during migration by the system user, the User and Updated Date column values that were recorded in the XEVMPD Audit Report were incorrect. This issue is resolved.
26227; [00064595]	6.2.0.4.0079	N/A	If the time of the Approved status was set to a time that was earlier than that of the Submitted status, the status in the Event attributes in the Countries tab changed to Submitted. This issue is resolved.
26210, 25081; [00064119, 00064088, 00063968, 00050671]	6.2.0.4.0079	6.2.0.2.0081, 6.2.0.3.0065	Support for Veeva users configured for SSO authentication has been added to Calyx RIM.
26201;	6.2.0.4.0079	N/A	When e-signature is enabled for PingOne users, the system accepted any user credentials for e-signature instead of the logged in user credentials. As a result, anyone (including Read-only users) could sign in and save changes. This issue is resolved.
26199; [00064147]	6.2.0.4.0079	N/A	Extractions were generated for each assembly element containing a special sheet, if it pointed to the same template, and there was more than one settings profile with the same template file. It happened after the template update and the next Render Generated TOCs and Special Sheet Templates. This issue is resolved. Now extraction request is sent once per special sheet template.
26195; [00064087]	6.2.0.4.0079	N/A	When an activity name was longer than 255 characters, trying to complete that activity resulted in an error. This issue is resolved.
26193; [00064402]	6.2.0.4.0079	N/A	When selecting a file with an uppercase extension ( For example - .DOC or .PDF) in the Registration Attachment page, the Attachment Name and the File Name fields were not populated. This issue is resolved.
26163; [00063867]	6.2.0.4.0079	N/A	Folder structure of study reports created when importing an eCTD application was incorrect. This issue is resolved.
26142; [00063604]	6.2.0.4.0079	N/A	When using the Volumize feature on an assembly that contained a volume with a TOC attached to it, there was an error. This issue is resolved.
26139; [00063733]	6.2.0.4.0079	N/A	Creating a new assembly, or importing using an existing assembly, took longer than expected. This issue is resolved.
26137; [00062685]	6.2.0.4.0079	N/A	An invalid reference error occurred when changing the XML definition file in the publishing settings from U.S. 2.0.1 to U.S 3.3 if more than one application type with the same us-3-3 Application DTD/Schema and eCTD code existed. This issue is resolved.
26127; [00063568]	6.2.0.4.0079	N/A	The URL in the e-mail that was sent to concerned users when an Event-Country Status was changed, failed to resolve to the expected target. This issue is resolved. Now, clicking the URL navigates to the event country where the status was created or updated.
26122; [00063208 ]	6.2.0.4.0079	6.2.0.3.0070	A role was not accessible on the Security Administration page if the role had all License Modules settings set to None/Select. This issue is resolved.
26120; [00063566]	6.2.0.4.0079	N/A	When an assembly section was selected in the Import Assembly Wizard or when creating an assembly from assembly, the corresponding assembly tree sections at the bottom half of the page were not displayed. Also, the full length of the scroll bar was not displayed, even on a maximized browser window. These issue are resolved.
26063; [00062715]	6.2.0.4.0079	N/A	The query for the List of Product Registrations with Application and Product Detail Properties report failed to display the result on the screen. This issue is resolved.
26057; [00063029]	6.2.0.4.0079	N/A	The Reset TOC Content button was not enabled in assemblies unless the Standalone Assemblies value for Home Page access under Security Administration was set to `Yes`. This issue is resolved.
26046; [00062700]	6.2.0.4.0079	N/A	The performance of refreshing the Link Inspector took several hours. This issue is resolved. The performance has been improved in sequence assemblies with: External links in documents when source and target are within the same tree Internal links in documents In-Process links in documents
25996; [00060206]	6.2.0.4.0079	N/A	In the Global Project Planning (GPP) wizard, selecting multiple events that exceeded the query limit, resulted in the disappearance of the Update Project Event Country Status field in some cases. The SQL query limit has been increased. This issue is resolved.
25990; [00060779]	6.2.0.4.0079	N/A	When trying to create an Event-Country Status under a closed Event that was created via a workflow, there was an error. This issue is resolved.
25941; [00060258]	6.2.0.4.0079	N/A	Unauthorized remote users were able to access Red Hat JBoss EJBInvokerServlet. This issue is resolved by commenting the JBoss `EJBInvokerServlet` code block in the web.xml file. For more information, see Disabling Unauthorized Users from Accessing Red Hat JBoss EJBInvokerServlet.
25979; [00060743]	6.2.0.4.0079	N/A	When the screen resolution was set lower than [X]x1050 format, users were not able to send a publish request because the OK and Cancel buttons on the Publish Request and Job Details windows were not visible. This issue is resolved.
25862	6.2.0.4.0079	N/A	In an assembly tree, after running Prepare to Publish, deleting a leaf containing a source document linked to a target document resulted in a warning: "ORA-02292: integrity constraint (ODS.R_339) violated - child record found." This issue is resolved.
25566; [00054314]	6.2.0.4.0079	N/A	When using the eCTD Import process to import an assembly containing reference leafs and assigned documents down in the assembly tree, the reference leafs and the documents were switched in the imported assembly. This issue is resolved.
24253; [00042959]	6.2.0.4.0079	N/A	Performance was decreased when updating an assembly structure and when using the Prepare to Publish functionality to remove empty leafs and folders. The decrease in performance sometimes resulted in failures because of concurrent activities in progress. These issues are now minimized improved performance from Assembly enhancements. See: Liquent InSight 6.2 CHF 4 Release Notes