Flu Strain Attributes

The following table represents the flu strain attributes and their descriptions.


Attribute	Description
Application Code	Code identifying the application associated with the PDS.
Application Name	Name of the application associated with the PDS.
Component Name	Component to which this detail is associated.
Concentration Measure Type	Used with other attributes to specify information about the concentration of the flu strain. Values: Equal, Range, Up to, or Not Less Than.
Date QC'd	The date the QC Status was set.
Family Code	Product family with which the PDS is associated.
Family Name	Product family with which the PDS is associated.
Flu Strain Comments	Free format text box where users can enter comments.
Flu Strain Description	Free format text box for entering descriptive information.
Flu Strain Keywords	Free format text box where users can enter text for searching purposes.
Flu Strain Name	Name of the flu strain, such as H1N1, Swine, etc.
Flu Strain Status	Status of detail.
Flu Strain Status Date	Date on which the status of the detail was set.
High Amount Denominator Prefix	The high limit amount denominator value. Must only be specified when a Range is described. Must be a Value from the published list.
High Amount Denominator Unit	The high limit amount denominator unit. Must only be specified when a Range is described. Must be a Value from the published list.


Attribute	Description
High Amount Denominator Value	The high limit amount denominator value. Must only be specified when a Range is described.
High Amount Numerator Prefix	The high limit amount numerator prefix must only be specified when a Range is described. Must be a Value from the published list.
High Amount Numerator Unit	The high limit amount numerator unit must only be specified when a Range is described. Must be a Value from the published list.
High Amount Numerator Value	The high limit amount numerator value. Must only be specified when a Range is described.
Like or Derived Strain Name	Name of similar or derived flu strain.
Low Amount Denominator Prefix	The low limit amount denominator prefix or for non-range measurements the amount denominator prefix. Must be a Value from the published list.
Low Amount Denominator Unit	The low limit denominator unit or for non-range measurements the amount numerator unit. Must be a Value from the published list.
Low Amount Denominator Value	The low limit amount denominator value or for non-range measurements the amount denominator value.
Low Amount Numerator Prefix	The low limit amount numerator prefix or for non-range measurements the amount numerator prefix. Must be a Value from the published list.
Low Amount Numerator Unit	The low limit amount numerator unit or for non-range measurements the amount numerator unit. Must be a Value from the published list.
Low Amount Numerator Value	The low limit amount numerator value or for non-range measurements the amount numerator value.
Measurement Point	The physical or logical location at which a condition is described.
Product Detail Set Name	PDS with which this detail is associated.
Product Name	Full concatenated product name to which the PDS/Template is associated.
QC Status	QC Status of the detail.
QC'd by	Person logged on to the system who set the QC Status for the detail to QC Passed or QC Failed.

Table 29. Table 1. IDMP Presentation Strength


Attribute	Compo nent Type	Description
Strength (Presentation) Quantity Operator	P, PMD, Vet, FV	Equates to Quantity Operator in IDMP. Refers to values per unit being defined. Example: Equal, Range, Up to, Not Less Than.Note: When Equal is selected, it is not displayed in the XEVMPD Strength , IDMP Presentation Strength , IDMP Concentration Strength columns on the related tabs.
Presentation Single/Low Limit  - Numerator Value	P, PMD, Vet	The Presentation Single or Low Limit Numerator Value.
Presentation Single/Low Limit Numerator - Unit of Measurement	P, PMD, Vet	The Unit of Measurement is available for some of the attributes. Some of the values are: ml, mg.
DP Presentation Single or Low Limit Unit of Presentation	P, PMD, Vet	The Unit of Presentation is available for some of the attributes. Some of the values are: Bottle, Tablet, Capsule.
Presentation Single/Low Limit Denominator Value	P, PMD, Vet	The value for Presentation Single/Low Limit Denominator.
Presentation Single/Low Limit Denominator  - Unit of Presentation/Measurement	P, PMD, Vet	The value from Unit of Presentation and Unit of Measurement.
Presentation High Limit Numerator Value	P, PMD, Vet	The Presentation High Limit Numerator Value.
Presentation High Limit Numerator  - Unit of Measurement	P, PMD, Vet	The Unit of Measurement is available for some of the attributes. Some of the values are: ml, mg.
DP Presentation High Limit Unit of Presentation	P, PMD, Vet	The Unit of Presentation is available for some of the attributes. Some of the values are: Bottle, Tablet, Capsule.

Table 29. Table 1. IDMP Presentation Strength (continued)


Attribute	Compo nent Type	Description
Presentation High Limit Denominator Value	P, PMD, Vet	The value for Presentation High Limit Denominator.
Presentation High Limit Denominator  - Unit of Presentation/Measurement	P, PMD, Vet	The value is taken from Unit of Presentation and Unit of Measurement.

Table 30. Table 2. IDMP Concentration Strength


Attribute	Description
Concentration Measure Type	Equates to Quantity Operator in IDMP. Refers to values per unit being defined. Example: Equal, Range, Up to, Not Less Than.
Concentration Single or Low Limit Denominator Value	The Concentration Single or Low Limit Denominator Value.
Concentration Single or Low Limit Unit of Measurement	The Unit of Measurement is available for some of the attributes. Some of the values are: ml, mg.
Concentration Single or Low Limit Numerator Value	The Concentration Low Limit Numerator Value.
Concentration High Limit Unit of Measurement	The Unit of Measurement is available for some of the attributes. Some of the values are: ml, mg.
Concentration High Limit Denominator Value	The Concentration High Limit Denominator Value.
Concentration High Limit Unit of Measurement	The Unit of Measurement is available for some of the attributes. Some of the values are: ml, mg.