Other Data Maintenance
In Data Administration, data values in the Other section appear in lists on the Entity Attributes pages and are designated when an entity is created or changed.
When you select a value under Other, a page opens with a table of values that have been defined. You can sort these values by column. The default view is sorted in ascending, alphanumeric order.
Note: The proper Data Administration access privileges are required to view and modify the values in Other Data Maintenance section.
All XEVMPD Data Administration tables provide the ability to configure extra fields. The standard set consists of twenty extra text fields, five extra date fields, and five extra number fields.
Other Data Maintenance Values
You can create and maintain the following values:
| Value | Description |
|
Application Submission Type Values |
A marketing authorisation application. You can define it using a term ID. |
|
Attached Document Content Type Values |
A document format that European Medicines Agency (EMA) supports. |
| Attached Document Status Values | Used to define the status of the document attached. For example: Current, Planned. |
| Certificate Master File Values | Used to include certificates referring to the composition of the medicinal product. |
|
Concentration Measure Type Values |
Name and code for a relational operator used with a concentration unit to define the concentration of an active ingredient in a pharmaceutical product. For example, if a tablet has 200 milligrams of the active ingredient, the concentration measure type is equal and the concentration unit is milligrams. The list contains the concentration type term names and concentration type codes from the EMA Concentration Types CV. The default value is set to Active. The standard set of extra fields can be configured for this value. |
|
Data Carrier Identifier Source Values |
Defines the source of data carrier identifiers for medicinal product packaging. |
| Denominator Unit Values | Name and code that identify a unit of measure, such as milligram, in denominators used to define the strengths of ingredients in medicinal products. The list contains the CV for Denominator Unit. The standard set of extra fields can be configured for this value. |
| Device Type Values | Name and code that indentify a type of the device, such as administration device, integrated device, medical device, other device. |
| Entity XML/UI Mappings |
Defines XML mappings for Ennov InSight entity elements. Warning: Do not deactivate the Entity XML Type Name Package Set Registration. There are Ennov InSight functions and procedures, such as the "Create New Applications - Package Set Registration" Global Project Planning wizard, that rely on this value remaining active. |
| File Identifier Type Values | The list of file identifier types. |
| Value | Description |
| Home Page Display Properties |
Used to add or remove shortcuts to wizards and to modify text labels that appear on the Home page. You can enter a maximum of 50 characters for Home Page Title Bars, Menu Bar Display, and I Am Looking To entity labels. You can enter a maximum of 250 characters for Tooltip text. |
|
Indications/ Intended Use Values |
An indication is a disease or condition for which a drug is approved and for which it is intended to be used. Sub-indication values must exist in the system to be able to associate them with indication/intended use values. The default value is set to Active. The standard set of extra fields can be configured for this value. |
| Language Values | The two-letter language code ISO 639-1:2002 Alpha-2 is assigned to the language. The default value is set to Active. The standard set of extra fields can be configured for this value. |
| Legal Basis Values | Assigned name and code for the legal basis of the product. The list contains values for legal basis and codes for the legal basis term/name from the EMA CV. The default value is set to Inactive. The standard set of extra fields can be configured for this value. |
| Length Unit of Measure Values | The length can be specified using a numerical value and its unit of measurement. |
|
MAH/Development Sponsor/ Organisation Values |
Name, address, and other information, including the Organisation Identifier, Location Identifier and Location Status attributes, for marketing holder authorization/development sponsor and organization. The default value is set to Inactive. The standard set of extra fields can be configured for this value. |
|
Note: The following attributes are used to maintain the integration with Organisations management service (OMS) introduced by European Medicines Agency (EMA): — MAH/Development Sponsor/Organisation Name — Organisation Identifier — Address — City — Post Code — Country — Location Identifier — Location Status |
|
| Master File Location (MFL) Values | Name and address information for the master file location company, with EudraVigilance code and comments. The standard set of extra fields can be configured for this value. |
| Value | Description |
| Message Sender Values | The unique identifier of an organization that can send information to EudraVigilance. This identifier is assigned when the organization registers with EudraVigilance. The standard set of extra fields can be configured for this value. |
| Numerator Unit Values | Name and code that identify a unit of measure in numerators used to define the strengths of ingredients in medicinal products. The default value is set to Inactive. The standard set of extra fields can be configured for this value. |
| Previous EV Code Values |
Define previous EV code values to map with new EV codes. The Previous EV Code is assigned to Approved Substance, Pharmaceutical Form, and Route of Administration. The standard set of extra fields can be configured for this value. |
| Quantity Unit of Measure Values | Describes the quantity of the pharmaceutical product. It is specified as a value and a unit. |
|
Reason for E- Signature Values |
Reasons for changing entities; available when an e-signature is required. |
|
Reason for Termination/ Withdrawal Values |
Reasons for entity termination or withdrawal. Available for: Application, Product, Event, Sequence, Registration. |
| SME Status Values |
Define values to determine N/A (for non-SMEs), micro, small, and medium companies in correspondence with the quantity of employees, along with their codes. The SME status is required for all updates and inserts of organisations that are Marketing Authorisation Holders. SME Status Name and SME Status Code must be unique in the system. The default value is set to Active. The standard set of extra fields can be configured for this value. |
|
Source of Information Values |
Defines the sources of information. The RMS value is mapped to the Source of Information SPOR RMS List. |
| Sub-Indication Values | Used for veterinary products, sub-indication values represent parasites to be associated with an indication. Multiple sub-indications can be associate with an indication, and a sub-indication can be associated with multiple indications. |
| System Alert Type Values | The System Alert Type allows the user to further define or categorize the System Alert. The System Alert entity provides the ability to create and distribute important messages to Ennov InSight users and groups. System Alerts appear in the Alert Center on the Effective Date set for the Alert. They are displayed for the recipients of the Alert and are removed automatically from the Alert Center on the Expiration Date set for the Alert. |
| Value | Description |
|
Units of Measurement Values |
Strength (quantitative composition) of the substances (including active substances, ingredients, solvents, adjuvant as applicable) as a numerator and denominator value. This table provides values for the following reports: — Entity History Query — Querying > Product Detail Management > Application History Query — Querying > Product Detail Management > Application QC Status History Query |
| Unit of Measure Prefix Values |
Name and code that identify a unit of measure, such as milligram, used to define the strengths of ingredients in medicinal products. The list contains unit of measure prefix values and prefix codes for the unit of measure prefix term/name from the EMA Units of Measure CV. The default value is set to Inactive. The standard set of extra fields can be configured for this value. |
| Unit of Presentation Values | The unit of presentation is a qualitative term describing the discrete unit in which a pharmaceutical product is presented to describe strength or quantity in cases where a quantitative unit of measurement is not appropriate. |
| Weight Unit of Measure Values | The weight can be specified using a numerical value and its unit of measurement. |
Application Submission Type Attributes
To define an application submission type value, enter values for the following attributes:
| Attribute | Description |
| Application Submission Type Name | Application Submission Type name. |
| Last User Updated | Indicates the name of the user who last created/updated the application submission type. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Attached Document Content Type Attributes
To define a attached document content value, enter values for the following attributes:
| Attribute | Description |
| Attached Document Content Type Name | Attached Document Content Type name. |
| Attribute | Description |
| Last User Updated | Indicates the name of the user who last created/updated the attached document content. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Attached Document Status Attributes
To define a attached document status value, enter values for the following attributes:
| Attribute | Description |
| Attached Document Status Name | The name of the status of the document attached. |
| Last User Updated | Indicates the name of the user who last created/updated the attached document status. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Certificate Master File Attributes
To define a certificate master file value, enter values for the following attributes:
| Attribute | Description |
| Master File Name | The name of master file. |
| Master File Type | Displays a list of the file types. |
| Master File Version | Displays the version of the master file. |
| Master Identifier | Unique identifier from Practice Management System (PMS) system. |
| Certificate Type | A file Identifier type. |
| Certificate Number | A file identifier code. |
| Submission Date | The date when the certificate is submitted. |
| Date of Last Update | The date of last update. |
| Substance Reference | Displays substances to select as a substance reference. |
| Related Application | Displays related applications. |
| Attribute | Description |
| Manufacturer | Displays manufacturers. |
| Content Link | A link to DMS content. |
| Local Identifier | Unique identifier generated on creation. |
| Note: By default, the field is hidden. | |
| Status | Status from Practice Management System (PMS) , for example, Active, Draft, Current, Superseded, Entered-in-error. |
| Version | This field is used for IDMP submission logic functionality. |
| Note: By default, the field is hidden. | |
| Last User Updated | Indicates the name of the user who last created/updated the certificate master file values. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Concentration Measure Type Attributes To define a concentration measure type value, enter values for the following attributes:
| Attribute | Description |
| Concentration Measure Type Name | Concentration Measure Type term name. Examples: Equal, Range, Less Than. |
| Concentration Code | Concentration Measure Type Code associated with the Concentration Measure Type Name. |
| RMS Term Name | List of Active Concentration Measure Type RMS Values must be available for selection. |
| Last User Updated | Indicates the name of the user who last created/updated the concentration measure type. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Attribute | Description |
| Active | Indicates if the entity is active or inactive. |
Data Carrier Identifier Source Values
To define a data carrier identifier source value, enter values for the following attributes:
| Attribute | Description |
|
Data Carrier Identifier Source |
Indicates the source of data carrier identifier for medicinal product packaging. |
| RMS Term Name | List of Source of Information RMS Values available for selection. |
| Last User Updated |
Indicates the name of the user who last created/updated the concentration measure type. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Device Type Attributes
To define a device type value, enter values for the following attributes:
| Attribute | Description |
| Code Value | The actual value for the code. |
| Code Name | The full name and/or description for the code. |
| Last User Updated | Indicates the name of the user who last created/updated the device type. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Denominator Unit Attributes
To define a denominator unit value, enter values for the following attributes:
| Attribute | Description |
| Denominator Unit Name | Denominator Unit Name assigned by EMA. |
| Denominator Code | Denominator Unit Code assigned by EMA. |
| RMS Term Name | List of Denominator/Numerator Unit RMS Values available for selection. |
| Attribute | Description |
| Last User Updated | Indicates the name of the user who last created/updated the denominator unit. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Entity XML UI Mappings Attributes
To define an entity XML UI mappings value, enter values for the following attributes:
| Attribute | Description |
| Entity XML Type Name | Name of the Product Family Type in InSight. |
| Associated Entity | The entity for which the type is being defined. |
| Entity XML Type XML Mapping | The list of entity types defined in XML. |
| Default Flag | Flag to indicate if the value is the default.Yes and No values are available for selection. |
| Description | Free format text box for entering descriptive information. |
| Last User Updated | Indicates the name of the user who last created/updated the entity XML UI mappings. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
File Identifier Type Attributes
To define an application submission type value, enter values for the following attributes:
| Attribute | Description |
| Filе Identifier Type | Filе Identifier Type name. |
| Last User Updated | Indicates the name of the user who last created/updated the file identifier type. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Homepage Display Properties Attributes
To define a homepage display properties value, enter values for the following attributes:
| Attribute | Description |
| Entity Type | Displays a list of entity types in Ennov InSight . The user will have the ability to modify the display properties for the entity type selected. |
| Name | Displays a list of entities for the Entity Type selected. |
| Display | The display value for the entity name selected. |
| Comments | Displays a blank text box to enter comments. |
| Last User Updated | Indicates the name of the user who last created/updated the homepage display properties. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Indications/Intended Use Attributes
To define an indications/intended use value, enter values for the following attributes:
| Attribute | Description |
| Indications/ Intended Use | Name of the Indication or Indication Group - When populated with MedDRA terms, this will be the Preferred Term (PT) from the MedDRA dictionary. |
| Sub-Indications | Sub-indications that belong to a specific indication group. Examples would be parasites such as Fasciola Hepatica, Fasciola Gigantica etc that belong to the Fasciola Hepatica Indication group. |
| MedDRA Level | MedDRA Level: Higher Level Group Term (HLGT), Higher Level Term (HLT), Lower Level Class (LLT), Preferred Term (PT), System Organ Class (SOC). |
| MeDRA Code | This field should have correct value depending on MeDRA Level value selected. |
| Note: one of three following fields Indications/Intended Use, MedDRA Level, MedDRA Code should be unique in the system. | |
|
MedDRA Term Version |
When populated with MedDRA terms this is the version where the term can be found. |
| MedDRA Term Last Updated | Last time the Medra Term was updated auto populated by system. |
| Description | Free format text box for entering descriptive information. |
| Comments | Free format text box where users can enter information. |
| Attribute | Description |
| Keywords | Free format text box where users can enter text for searching purposes. |
| Last User Updated | Indicates the name of the user who last created/updated the indications. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Language Attributes
To define a language value, enter values for the following attributes
| Attribute | Description |
| Language Name | Name of the Language. |
| Language Code | 2-letter language code assigned to language ISO. |
| ISO ALPHA-3 CODE | 3-letter language code assigned to language. |
| RMS Term Name | List of Language RMS Values available for selection. |
| Last User Updated | Indicates the name of the user who last created/updated the language. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
:
Legal Basis Attributes
To define a legal basis value, enter values for the following attributes:
| Attribute | Description |
| Legal Basis Name | Legal Basis term. |
| Legal Basis Code | Code assigned to the Legal Basis value. |
| RMS Term Name | List of Language RMS Values available for selection. |
| Last User Updated | Indicates the name of the user who last created/updated legal basis. By default, this option is read-only.It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Attribute | Description |
| Active | Indicates if the entity is active or inactive. |
Length Unit Of Measure Attributes
To define a length unit of measure value, enter values for the following attributes:
| Attribute | Description |
| Code Value | The actual value for the code. |
| Code Name | The full name and/or description for the code. |
| Last User Updated | Indicates the name of the user who last created/updated the length unit of measure. By default, this option is read-only.It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
MAH/Development Sponsor/Organisation Attributes
To define a MAH/Development Sponsor/Organisation value, enter values for the following attributes:
| Attribute | Description |
| MAH/Development Sponsor/ Organisation Name | Name of the Marketing Authorization Holder or Sponsor. |
| Address | MAH/Sponsor address line. |
| City | MAH/Sponsor city. |
| Region | MAH/Sponsor state. |
| Post Code | MAH/Sponsor post code. |
| Country | MAH/Sponsor country name. |
| Telephone Number | MAH/Sponsor telephone number. |
| Telephone Extension | MAH/Sponsor telephone extension. |
| Telephone Country Code | MAH/Sponsor telephone country code. |
| Fax Number | MAH/Sponsor fax number. |
| Fax Extension | MAH/Sponsor fax extension. |
| Fax Country Code | MAH/Sponsor fax country code. |
| E-Mail Address | MAH/Sponsor E-Mail address |
|
Is Company Responsible for XEVMPD |
Is used in the XEVMPD Wizard to help in selecting only records that the company is responsible for sending. |
| Attribute | Description |
| Organisation Sender ID | Organization Sender ID |
| Location Status | Location Status. Predefined values: [Select], Active, Inactive. |
| SME Status | SME Status. |
| SME Number | SME number of the organisation where applicable. |
| Comments | Comments |
| Last User Updated | Indicates the name of the user who last created/updated the MAH/ development sponsor/organisation. By default, this option is readonly. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Master File Location (MFL) Attributes To define a master file location value, enter values for the following attributes:
| Attribute | Description |
| MFL Company | Name of the company that holds the Pharmacovigilance System Master File (PSMF). MFL is currently optional by EMA, but if the MFL used, schema will require associated fields. |
| Department | Name of the department that holds the PSMF. |
| Building | Building part of the address. |
| Street | Street part of the address. |
| City | City part of the address must be specified. |
| State | State part of the address |
| Post Code | Post Code (ZIP) part of the address must be specified. |
| Country | All active Country codes from the Country Values pick list are available for selection. |
| Note: one of following listed fields: MFL Company,Street,City,Post Code,Country,Department,Building should be unique in the system. | |
|
Date Submitted to EMA |
Date Submitted to EMA. It will be populated automatically when Acknowledgement Wizard is passed. |
| Attribute | Description |
| EV Code | Official EV Code assigned by the EMA. |
| XEVMPD Comments | Comments field. Comments are required for nullification. |
| Last User Updated | Indicates the name of the user who last created/updated the master file location. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Updated Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Message Sender Attributes
To define a message sender value, enter values for the following attributes:
| Attribute | Description |
|
Message Sender Name |
Name of the Sender associated with the XML file created. Should be unique in the system. |
| Message Sender ID |
Unique identifier of the sender organisation as assigned during the EudraVigilance registration process. This ID is used in the XML. This ID is used in the XML and is constrained for use on Marketing Auth (License) instead of the Organisation Sender ID, although they are likely the same. Should be unique in the system. |
| Last User Updated | Indicates the name of the user who last created/updated the message sender. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is readonly. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Numerator Unit Attributes
To define a numerator unit value, enter values for the following attributes:
| Attribute | Description |
|
Numerator Unit Name |
Name of the Sender associated with the XML file created. Should be unique in the system.Long Version of the Unit Measure name of the AI, Excipients, Adjuvants. Examples of short names to long names:%w/v=%wt/volume, etc Value taken from the OOTB pick list Substance Numerator Unit Values published by EMA. Should be unique in the system. |
| Numerator Code |
Short Version of the Unit Measure name of the AI, Excipients, Adjuvants. Examples: % w/v, etc. Value taken from the OOTB pick list Substance Numerator Unit Values published by EMA. Should be unique in the system. |
| Attribute | Description |
| RMS Term Name | List of Denominator/Numerator Unit RMS Values available for selection. |
| Last User Updated | Indicates the name of the user who last created/updated the numerator unit. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Previous EV Code Attributes
To define a previous EV Code value, enter values for the following attributes:
| Attribute | Description |
| Previous EV Code | Value of previous EV Code. |
| Code Type | Code Type. Examples: Select, Approved Substance, Pharmaceutical Form, Route of Administration. |
| Comments | Comments to the value. |
| Last User Updated | Indicates the name of the user who last created/updated the previous EV Code. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Quantity Unit Of Measure Attributes
To define a quantity unit of measure value, enter values for the following attributes:
| Attribute | Description |
| Code Value | The actual value for the code. |
| Code Name | The full name and/or description for the code. |
| Last User Updated | Indicates the name of the user who last created/updated the quantity unit of measure. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Reason for E-Signature Attributes
To define a reason for E-Signature value, enter values for the following attributes:
| Attribute | Description |
| Reason for ESignature | Reason for making a modification on an entity. Examples: Status Update, Error correction, Date Correction. |
| Last User Updated | Indicates the name of the user who last created/updated reason for ESignature. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Reasons for Termination/Withdrawal Attributes
To define a reason for termination/withdrawal value, enter values for the following attributes:
| Attribute | Description |
|
Reasons for Termination/ Withdrawal |
Reason for termination or withdrawal an entity. Applicable for: Application, Product, Event, Sequence, Registration (both types). |
| Last User Updated | Indicates the name of the user who last created/updated the reasons of termination/withdrawal. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
SME Status Attributes
To define a SME status value, enter values for the following attributes:
| Attribute | Description |
| SME Status Name | SME Status Name. |
| SME Status Code | SME Status Code. |
| Last User Updated | Indicates the name of the user who last created/updated the SME status. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Source of Information Attributes
To define a source of information value, enter values for the following attributes:
| Attribute | Description |
|
Source of Information Name |
The name of source of information. |
| RMS Term Name | List of Source of Information RMS Values available for selection. |
| Last User Updated |
Indicates the name of the user who last created/updated the source of information. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Sub-Indication Attributes
To define a sub-indication value, enter values for the following attributes:
| Attribute | Description |
| Sub-Indication | Sub-Indication. |
| Last User Updated | Indicates the name of the user who last created/updated a sub-indication. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
System Alert Type Attributes
To define a system alert type value, enter values for the following attributes:
| Attribute | Description |
| Alert Type | The Alert Type allows the user to further define or categorize the System Alert entity. |
| Last User Updated | Indicates the name of the user who last created/updated the system alert type. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Unit of Measure Prefix Attributes
To define a unit of measure prefix value, enter values for the following attributes:
| Attribute | Description |
| Unit of Measure Prefix Name | The System Alert Type allows the user to further define or categorize the System Alert entity. |
| Prefix Code | Code assigned to the Unit of Measure prefix. Should be unique in the system. |
| RMS Term Name | List of Unit of Measure Prefix RMS available for selection. |
| Last User Updated | Indicates the name of the user who last created/updated the unit of measure prefix. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Unit Of Presentation Attributes
To define a unit of presentation value, enter values for the following attributes:
| Attribute | Description |
| Code Value | The actual value for the code. |
| Code Name | The full name and/or description for the code. |
| Last User Updated | Indicates the name of the user who last created/updated the unit of presentation. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Weight Unit Of Measure Attributes
To define a weight unit of measure value, enter values for the following attributes:
| Attribute | Description |
| Code Value | The actual value for the code. |
| Code Name | The full name and/or description for the code. |
| Last User Updated | Indicates the name of the user who last created/updated the weight unit of measure. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |
Unit of Measurement Attributes
To define a weight unit of measure value, enter values for the following attributes:
| Attribute | Description |
|
Unit of Measurement Name |
Name that defines the unit of measurement. |
| Last User Updated | Indicates the name of the user who last created/updated the unit of measure. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Last Changed Date | Indicates the date when the last change was made. By default, this option is read-only. It is populated automatically when updates were made to the table. |
| Active | Indicates if the entity is active or inactive. |